| Author |
Message |
kadhimj
Regular Contributor
Joined: 05 Mar 2010
Posts: 84
Location: Colorado
|
 Posted:
Thu Mar 23, 2017 11:59 am |
   |
I have an older ('92) M22sd. When setting the pickup height, it's always been a balancing act between getting the output I like and reducing the shrill high end. Last night I tried something different:
I set all the pole pieces low. A millimeter or two into the pickup bobbin. Then raised the entire pickup for the output I like. This seems to have tamed the high end a bit while giving me the full powerful output of the pickup. I still have some tweaking to do, but I think I'm on to something here.
Anyone ever tried this? How are the pole pieces set on your M22SD? |
|
|
   |
|
alnico5
Regular Contributor
Joined: 21 Feb 2005
Posts: 123
Location: Batesville, Arkansas
|
| Posted:
Fri Mar 24, 2017 6:39 am |
|
I have not tried that but it's a good idea. I have a ToneStyler tone pot in my Carvin that slices off treble if I want. |
_________________
Can't stop abusing apostrophes? Visit wwwapostropheabuse.com |
|
|
|
kadhimj
Regular Contributor
Joined: 05 Mar 2010
Posts: 84
Location: Colorado
|
| Posted:
Mon May 15, 2017 2:38 pm |
|
Well, I found an even more sure fire solution...swap out the M22SD for a C22B! I'm not sure if my taste has changed or if I messed up this M22 pickup (I had to super glue it back together at one point), but I really like the C22B more. Cheers!  |
|
|
|
|
alnico5
Regular Contributor
Joined: 21 Feb 2005
Posts: 123
Location: Batesville, Arkansas
|
| Posted:
Mon May 15, 2017 5:12 pm |
|
Glad you like the C22B . I did not bond with the C22B and continue to love the M22SD. We are both happy! |
_________________
Can't stop abusing apostrophes? Visit wwwapostropheabuse.com |
|
|
|
ElfDude
Way Too Much Free Time
Joined: 30 Jun 2006
Posts: 4595
Location: In the shadows of the everlasting hills
|
| Posted:
Mon May 15, 2017 6:09 pm |
|
I like 'em both.
I do find that the M22SD needs the right guitar to make it shine though.
 |
_________________
"Hide the decline."
Carvin SH445, SH225, Contour 66, AE185, DC135, CT4M, Bolt, LB76F, Vintage 16, Nomad |
|
 |
|
kadhimj
Regular Contributor
Joined: 05 Mar 2010
Posts: 84
Location: Colorado
|
| Posted:
Wed May 17, 2017 5:51 pm |
|
M22SD was my main pickup for almost 20 years before mine fell apart! I've had this C22B sitting on a shelf for over 10 years and only remembered I didn't like it when I first got it. I must be getting old! |
|
|
|
|
alnico5
Regular Contributor
Joined: 21 Feb 2005
Posts: 123
Location: Batesville, Arkansas
|
| Posted:
Wed May 17, 2017 9:53 pm |
|
I have an M22SD from 1982. It is VERY mid-heavy compared to my 1986 and later ones. |
_________________
Can't stop abusing apostrophes? Visit wwwapostropheabuse.com |
|
|
|
wickid
Curator: Carvin Museum of NY
Joined: 13 May 2005
Posts: 1093
Location: NY
|
| Posted:
Thu May 18, 2017 3:38 pm |
|
The SD to me is something you are either into or not. Whenever I play 1 of my SD equipped Carvins, after a while the high end of it starts grating on me.
I keep it as-is in my original '85 V220, and in my '92 DC400, I lowered it just a bit and roll the vol back a hair more than usual, all done "to taste". I basically try to get it into M22T territory. But its not 100% there, and not 100% M22SD either anymore. That's kinda why I haven't replied here before. I felt the best solution really was some other p/up. But glad you found what works. (Try an M22T sometime.  ) |
_________________
My Carvin gear time capsule...
(Any photobucket links are probably now broken. Grrrrrr!!!) |
|
|
|
|
|
The views and opinions expressed on the Carvin Museum Forums are solely the responsibility of the authors, and do not necessarily reflect those of the
Carvin Museum Webmaster, or of
Kiesel Guitars/
Carvin Guitars.
