KieselGuitars.com     FAQ    Search    Memberlist    Register   Profile   Log in to check your private messages   Log in  
 
 
 V220 / Ultra V Reissue View next topic
View previous topic
Post new topicReply to topic
Author Message
scary gary
Nothing to see here,move along.


Offline
Joined: 16 Mar 2006
Posts: 120
Location: Cullman,Alabama

PostPosted: Mon Feb 26, 2007 1:09 am   Reply with quoteBack to top

I was gonna wait till it got here but I cant hold it in.Heres my V order.It went into neck construction the 13th.

Ultra V

M bridge

2 piece walnut neck and walnut body

3 step black stain over flamed maple body top and headstock

Black hardware

M22 SD / H22N

coil splitters and phase switch

Birdseye maple fret board no inlays

Stainless Jumbos

Tung oiled neck

Gold Logo

ENgraved TRC


Yummy!
View user's profileSend private messageVisit poster's website
axmaker
Occasional Visitor


Offline
Joined: 25 May 2006
Posts: 72
Location: Oakley, California

PostPosted: Mon Feb 26, 2007 1:14 am   Reply with quoteBack to top

i think i'm going to get a hardtail, and retro a kahler.
View user's profileSend private messageSend e-mailVisit poster's website
scary gary
Nothing to see here,move along.


Offline
Joined: 16 Mar 2006
Posts: 120
Location: Cullman,Alabama

PostPosted: Mon Feb 26, 2007 10:04 pm   Reply with quoteBack to top

I was going to do that but it isnt available with a hard tail . Mad

Of course it could still be done.I bet it would even cover the string through holes!

But I have three pointys with Kahlers so I will leave this one as it is.

And I got my post card today.May 8th.....

MAY THE 8TH!!!!! Bang Head
View user's profileSend private messageVisit poster's website
RyanF
Carvin Addict


Offline
Joined: 27 Feb 2006
Posts: 283

PostPosted: Mon Feb 26, 2007 10:48 pm   Reply with quoteBack to top

scary gary wrote:
I was going to do that but it isnt available with a hard tail . Mad

Of course it could still be done.I bet it would even cover the string through holes!

But I have three pointys with Kahlers so I will leave this one as it is.

And I got my post card today.May 8th.....

MAY THE 8TH!!!!! Bang Head

Ouch.. That's almost 3 months total. Hang in there!

_________________
Rockin' the MTS and DC127
View user's profileSend private messageSend e-mail
scary gary
Nothing to see here,move along.


Offline
Joined: 16 Mar 2006
Posts: 120
Location: Cullman,Alabama

PostPosted: Mon Feb 26, 2007 11:07 pm   Reply with quoteBack to top

Hey I could do like Jim Carey in his new #23 movie.Jump out a window,hit my head and forget about my new Ultra V.Then It will arrive and Ill be like HEY COOL WHERED THIS COME FROM?Then my wife would bring me the bank statement...
View user's profileSend private messageVisit poster's website
Azulihawx
Newbie


Offline
Joined: 15 Mar 2006
Posts: 10
Location: Phoenix,AZ

PostPosted: Tue Feb 27, 2007 1:05 am   Reply with quoteBack to top

I ordered an Ultra V on Feb 5.Postcard estimates delivery at April 28.
Still in neck construction.Has any re-issue made it out of neck construction
yet?
View user's profileSend private message
axmaker
Occasional Visitor


Offline
Joined: 25 May 2006
Posts: 72
Location: Oakley, California

PostPosted: Tue Feb 27, 2007 4:50 am   Reply with quoteBack to top

scary gary wrote:
I was going to do that but it isnt available with a hard tail . Mad

Of course it could still be done.I bet it would even cover the string through holes!

But I have three pointys with Kahlers so I will leave this one as it is.

And I got my post card today.May 8th.....

MAY THE 8TH!!!!! Bang Head


the carvin site shows the v220 with a hardtail.
View user's profileSend private messageSend e-mailVisit poster's website
tbonesullivan
New and Improved


Offline
Joined: 19 Feb 2005
Posts: 3034
Location: Jersey

PostPosted: Tue Feb 27, 2007 4:21 pm   Reply with quoteBack to top

axmaker wrote:
the carvin site shows the v220 with a hardtail.
where? I only see the V220C that they had made for NAMM.

_________________
Guitars: C750, CT6M, EBlue Bolt
Basses: B4A, B5
Amps: MTS3212, XB212-2, V16, B800, PB100-15, Blue X-100B Series IV
Effects: Boss OD-20, Carvin XP4, AC120, ODB-3, ISP Dec.
View user's profileSend private messageAIM AddressYahoo MessengerMSN Messenger
scary gary
Nothing to see here,move along.


Offline
Joined: 16 Mar 2006
Posts: 120
Location: Cullman,Alabama

PostPosted: Tue Feb 27, 2007 8:57 pm   Reply with quoteBack to top

Azulihawx wrote:
I ordered an Ultra V on Feb 5.Postcard estimates delivery at April 28.
Still in neck construction.Has any re-issue made it out of neck construction
yet?


Im still there too man.Been there for14 days.

I wonder who will be the first!!!!! ????
View user's profileSend private messageVisit poster's website
runfromsticks
Regular Contributor


Offline
Joined: 23 Aug 2005
Posts: 150
Location: Long Island, NY

PostPosted: Tue Feb 27, 2007 9:26 pm   Reply with quoteBack to top

scary gary wrote:
I was gonna wait till it got here but I cant hold it in.Heres my V order.It went into neck construction the 13th.

Ultra V

M bridge

2 piece walnut neck and walnut body

3 step black stain over flamed maple body top and headstock

Black hardware

M22 SD / H22N

coil splitters and phase switch

Birdseye maple fret board no inlays

Stainless Jumbos

Tung oiled neck

Gold Logo

ENgraved TRC


Yummy!



Do you know what the M22SD/H22N combo would sound like? I'm kind of leaning towards that for a nice lead/heavy rhythm machine but I don't know what to expect from those pups
View user's profileSend private messageAIM Address
Delta362
Amp repairs and homebrew builds


Offline
Joined: 19 Feb 2005
Posts: 1827
Location: Erie, PA

PostPosted: Wed Feb 28, 2007 2:48 pm   Reply with quoteBack to top

Ordered with Eddie today. Mr. Green
Went for something very different from anything I have.

V220C
NWAL - 2 piece walnut neck/body sides
CG - clear gloss
TN - tung oil finish back of neck
IN - inline headstock
NIN - no top inlays-side dots only
STF - stainless steel frets
LN - locknut
BC -black chrome hardware
DSLB - drop shadow logo black
HC19 - hard case V220 ultraV
Date- unknown at this time.

Now I guess I'll keep busy at work for the next 2-3 months so as to not drive myself crazy.
View user's profileSend private message
gmac
Occasional Visitor


Offline
Joined: 24 Jan 2007
Posts: 39

PostPosted: Wed Feb 28, 2007 3:29 pm   Reply with quoteBack to top

nice options i had eddie to he made sure my purchase turned out as nice as i wanted it to. great guy
View user's profileSend private message
wickid
Curator: Carvin Museum of NY


Offline
Joined: 13 May 2005
Posts: 1114
Location: NY

PostPosted: Wed Feb 28, 2007 3:53 pm   Reply with quoteBack to top

I cant wait to see the real deals when you guys get 'em. Cool
View user's profileSend private messageVisit poster's website
axmaker
Occasional Visitor


Offline
Joined: 25 May 2006
Posts: 72
Location: Oakley, California

PostPosted: Wed Feb 28, 2007 4:02 pm   Reply with quoteBack to top

animephreak wrote:
axmaker wrote:
the carvin site shows the v220 with a hardtail.
where? I only see the V220C that they had made for NAMM.

it's there under V220M "tune-o-matic"
View user's profileSend private messageSend e-mailVisit poster's website
Delta362
Amp repairs and homebrew builds


Offline
Joined: 19 Feb 2005
Posts: 1827
Location: Erie, PA

PostPosted: Wed Feb 28, 2007 6:42 pm   Reply with quoteBack to top

I've ordered from Eddie in the past so when he answered the phone, I knew I was in good hands.

Wickid, when are you heading this way? Looks like you've got a 3 month invitation to get here on time. Mr. Green
View user's profileSend private message
scary gary
Nothing to see here,move along.


Offline
Joined: 16 Mar 2006
Posts: 120
Location: Cullman,Alabama

PostPosted: Wed Feb 28, 2007 7:05 pm   Reply with quoteBack to top

runfromsticks wrote:
scary gary wrote:
I was gonna wait till it got here but I cant hold it in.Heres my V order.It went into neck construction the 13th.

Ultra V

M bridge

2 piece walnut neck and walnut body

3 step black stain over flamed maple body top and headstock

Black hardware

M22 SD / H22N

coil splitters and phase switch

Birdseye maple fret board no inlays

Stainless Jumbos

Tung oiled neck

Gold Logo

ENgraved TRC


Yummy!



Do you know what the M22SD/H22N combo would sound like? I'm kind of leaning towards that for a nice lead/heavy rhythm machine but I don't know what to expect from those pups


Oh yeah,its gonna be nice, I do lots of leads with the neck PUP and just think how they will sound with the phase switch flipped.I think it will be nice!
View user's profileSend private messageVisit poster's website
scary gary
Nothing to see here,move along.


Offline
Joined: 16 Mar 2006
Posts: 120
Location: Cullman,Alabama

PostPosted: Sat Mar 03, 2007 12:16 am   Reply with quoteBack to top

The Ultimate Ultra V hit body construction today!
View user's profileSend private messageVisit poster's website
Azulihawx
Newbie


Offline
Joined: 15 Mar 2006
Posts: 10
Location: Phoenix,AZ

PostPosted: Sat Mar 03, 2007 11:36 am   Reply with quoteBack to top

scary gary wrote:
The Ultimate Ultra V hit body construction today!

Congrats!Good to know that they are finally making progress on the Ultra
Vs.Alas,mine still shows in neck construction.Maybe has something to do
with mine being all koa.Oh well.The wait continues....
View user's profileSend private message
scary gary
Nothing to see here,move along.


Offline
Joined: 16 Mar 2006
Posts: 120
Location: Cullman,Alabama

PostPosted: Sun Mar 04, 2007 7:10 pm   Reply with quoteBack to top

Azulihawx wrote:
scary gary wrote:
The Ultimate Ultra V hit body construction today!

Congrats!Good to know that they are finally making progress on the Ultra
Vs.Alas,mine still shows in neck construction.Maybe has something to do
with mine being all koa.Oh well.The wait continues....


Mine stayed in neck construction from 2/13 to 3/2.

I hear the koa is kind of hard to get.
View user's profileSend private messageVisit poster's website
fish
Museum Supporter


Offline
Joined: 16 Apr 2007
Posts: 223
Location: Depends on the time of day

PostPosted: Mon Apr 16, 2007 9:15 pm   Reply with quoteBack to top

Just put in a order for V220 over the weekend. Can not wait to get it. Going to be sweet. I have 6 Carvins but this will be the first one I have built from the ground up I will post a photo when it done
View user's profileSend private messageSend e-mailVisit poster's website
Display posts from previous:      
Post new topicReply to topic


 Jump to:   



View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


The views and opinions expressed on the Carvin Museum Forums are solely the responsibility of the authors, and do not necessarily reflect those of the
Carvin Museum Webmaster, or of Kiesel Guitars/Carvin Guitars.