KieselGuitars.com     FAQ    Search    Memberlist    Register   Profile   Log in to check your private messages   Log in  
 
 
 Add JJB Pickup to Martin 12-String View next topic
View previous topic
Post new topicReply to topic
Author Message
Brian D
Too Much Free Time


Offline
Joined: 19 Feb 2005
Posts: 1427
Location: Oceanside, Ca.

PostPosted: Sun Jul 10, 2016 6:34 pm   Reply with quoteBack to top

Around Dec 2013 I added JJB pickup to my Martin D35. The sound was very nice and natural. So, last week I bought another set for my Martin D12X1 12-String.



Here you can see how the pickup was installed. The manufacture recommended that the piezos be placed between the low E and A, between the D and G, and over the E. The locations should be under the saddle. That was tricky to do but got it done.

I used a guide board that was cut out to resemble the bridge plate. Punched some holes and use the pegs as guides. Drew a line where the saddle would be sitting and placed the pickups on that line.

If you look at the middle piezo you will see that I added a little too much glue. But it is all good.

I put on new strings so I will record a test in a few days and put it up here. I can tell you that I like these pickups. They are inexpensive and highly recommended by me. LOL

_________________
'75 Martin D-35
'08 Martin D12X1
'05 Carvin C750S



Music
http://www.reverbnation.com/briand

Photography
www.briandphoto.net
View user's profileSend private messageSend e-mail
X100BNut
Too Much Free Time


Offline
Joined: 28 Jul 2007
Posts: 799
Location: Hayward, CA

PostPosted: Thu Jul 14, 2016 1:45 am   Reply with quoteBack to top

Nice work. For six-string, I like EMG ACS pickups. They miss true acoustic sound as badly as a piezo under the bridge, but the way they miss sounds much better than piezo solutions I've had. On an old Yamaha 12-string Ihave, I mounted a standard electric guitar humbucker with adjustable pole pieces and rotated it a bit so that each half covers six strings, evens and odds.

If you want to have some fun, Cycfi (Cycfi.com) has 20Hz-20kHz low-noise active mag pickups. They're willing to custom make a mounting board for you.
View user's profileSend private message
Display posts from previous:      
Post new topicReply to topic


 Jump to:   



View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


The views and opinions expressed on the Carvin Museum Forums are solely the responsibility of the authors, and do not necessarily reflect those of the
Carvin Museum Webmaster, or of Kiesel Guitars/Carvin Guitars.